Subaru Legacy/Outback

1999-2003 of release

Repair and car operation

Removal, service and installation of screen wipers and components of a path of giving of a washing liquid

Design of forward screen wipers


1 — Rubber working elements 2 — Brushes 3 — Levers (leads) 4 — Draughts 5 — Privodnoj the electromotor	Efforts of a tightening of carving connections, Nanometer Т1: 6.0 Т2: 20

Design of forward screen wipers


1 — the Rubber working element 2 — the Brush 3 — the Lever (lead) 4 — Privodnoj the electromotor 5 — the Remote washer And 6 — the Pillow 7 — the Remote washer In 8 — the Nut 9 — the Cover	10 — a lever Overlay Efforts of a tightening of carving connections, Nanometer Т1: 5.9 Т2: 7.4 Т3: 7.8

The scheme of the organisation of giving of a washing liquid on the wind and back has flown down the car


1 — Nozzles of giving of a washing liquid 2 — Connecting hoses 3 — the Tank 4 — the Cover 5 — the Pump of giving of a washing liquid on a windscreen 6 — the Pump of giving of a washing liquid on back glass	7 — the Sealing landing plug Efforts of a tightening of carving connections, Nanometer Т: 6.0

Combined подрулевой the switch of management of functioning of screen wipers

The Onboard electric equipment see the Head.

Forward screen wipers

Replacement of brushes

PERFORMANCE ORDER

1. Take away the lever of a screen wiper from a windscreen.

2. Having wrung out a lock uvula, remove a brush from the lever.

3. Having delayed outside a clamp, take a rubber working element from a brush framework.

4. Fill in a brush a new working element, - track, that the clamp has appeared from the party of a brush turned towards the lever. Make sure of reliability защелкивания a clamp.

Removal, installation and adjustment of levers

PERFORMANCE ORDER

1. Open a cowl.
2. Remove protective caps of fixing nuts.

3. Release nuts and remove levers.

4. Installation is made upside-down. Having finished installation, unitary activate screen wipers, then level levers so that average points of brushes have appeared directly over ceramic adjusting labels on the windscreen panel.

Removal and installation of components of a drive of screen wipers

PERFORMANCE ORDER

The description of procedure of check of serviceability of functioning drive the electromotor is resulted in Section Check of serviceability of functioning of electromotors of a drive of screen wipers, removal, check and installation of the operating relay of a back screen wiper on models Legacy of Universal/Outback of the Head the Onboard electric equipment.

1. Remove the panel forward обтекателя (see Has undressed Removal and installation forward обтекателя).
2. Disconnect electroconducting from drive the electromotor.

3. Release fixing bolts and nuts and remove assemblage of a drive of screen wipers.

4. In case of need give fixing bolts and nuts and remove from assemblage приводной the electromotor.

5. Installation is made upside-down.

Back screen wiper (model Legacy of Universal/Outback)

PERFORMANCE ORDER

The description of procedures of removal/installation and check of a condition of the operating relay is resulted in Section Check of serviceability of functioning of electromotors of a drive of screen wipers, removal, check and installation of the operating relay of a back screen wiper on models Legacy of Universal/Outback of the Head the Onboard electric equipment.

Details of a design of screen wipers are shown on an illustration.

Removal, installation and lever adjustment

PERFORMANCE ORDER

1. Cast away a lever overlay, release a fixing nut and remove the lever.

2. Installation is made upside-down. Having finished installation, unitary activate a screen wiper, then level it so that the brush has appeared located in parallel токопроводной threads of a thermoelectric element of heating of back glass.

Removal and installation drive the electromotor

PERFORMANCE ORDER

1. Remove the screen wiper lever (see above).
2. Remove a protective cover, a fixing nut, remote washers and a rubber pillow.
3. Remove the bottom panel of internal furnish of a door of a back (see Has undressed Removal and installation of panels of an internal upholstery of doors, including a back door (models Legacy the Versatile person and Outback) and a luggage space cover (models the Sedan)).
4. Release a clamp of a plait of electroconducting, then disunite a contact socket drive the electromotor.

5. Turn out fixing bolts and remove assemblage drive the electromotor.

6. Installation is made upside-down, - track, that the rubber pillow has appeared is developed by a label in the form of an arrow upwards.

Components of a path of giving of a washing liquid

The scheme of the organisation of giving of a washing liquid on the wind and back has flown down the car is presented on an illustration.

Removal, installation and adjustment snuffled givings of a washing liquid

Windscreen nozzles

PERFORMANCE ORDER

1. Open a cowl and disconnect from reception unions of a nozzle subject to replacement a hose of giving of a washing liquid.

2. A screw-driver, or other suitable tool wring out lock uvulas and liberate a nozzle from the cowl panel.

3. Installation is made upside-down, - track, that the hose of giving of a washing liquid has not appeared is overwound.

4. Adjust nozzles according to the scheme resulted on an illustration.

And: 350 mm
In: 150 mm
With: 300 mm
D: 600 mm

Nozzle of back glass (model Legacy of Universal/Outback)

PERFORMANCE ORDER

1. Remove a top level stoplight (the Onboard electric equipment see the Head).
2. Disconnect from the reception union of a nozzle a hose of giving of a washing liquid.
3. A screw-driver, or other suitable tool wring out lock uvulas and liberate a nozzle from the panel of a door of a back.
4. Installation is made upside-down, - track, that the hose of giving of a washing liquid has not appeared is overwound.

5. Adjust a nozzle according to the scheme resulted on an illustration.

And: 60 mm
IN: 42 °

Removal and tank and pump installation (ов) givings of a washing liquid

PERFORMANCE ORDER

1. Open a cowl.

2. Turn out two fixing bolts, disconnect a hose () and a contact socket () pump electroconductings (ов) givings of a washing liquid.

3. Remove the tank.

4. Liberate suspected (or requiring replacement) the pump from the landing plug in the tank case.

5. Having submitted on plugs of the pump pressure from the battery, make sure of serviceability of rotation of the electromotor.
6. Installation is made in an order, the return to an order of dismantle of components.

On the main page