Subaru Legacy/Outback

1999-2003 of release

Repair and car operation



Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Service of loops and car locks
   Replacement wind and the other fixed glasses
   Removal and installation of a decorative lattice of a radiator
   Removal and installation of the panel of protection картера
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal and installation локеров protection of arches of forward wheels
   Removal and installation of lateral overlays кузовных panels
   Removal and installation forward обтекателя
   Removal and installation of a back spoiler
   Removal and installation of lateral spoilers
   Removal and installation profile directing the top luggage carrier
   Removal installation of the main ware box
   Removal and installation of elements of the central console
   Removal and installation of the panel of devices
   Removal and installation of panels of an internal upholstery of doors, including a back door (models Legacy the Versatile person and Outback) and a luggage space cover (models the Sedan)
   Removal and installation of elements of internal furnish
   Seat belts - the general information, condition check, removal and installation, an order of recycling not worked emergency натяжителей
   Removal, service and installation of seats
   Removal, installation and cowl adjustment
   Removal, installation and adjustment of the lock of a cowl
   Removal and installation of forward wings
   Removal, installation and adjustment of door panels
   Removal, service and installation of components of the top hatches
   Removal, installation and check of components замковых assemblages
   Removal, installation and adjustment of door glasses and components Glass lifts
   Removal, service and installation of rear-view mirrors
   Removal, service and installation of screen wipers and components of a path of giving of a washing liquid
   Control кузовные the sizes
+ Onboard electric equipment





Removal, installation and check of components замковых assemblages

Design of locks of lateral doors

1 — the Internal handle
2 — Facing of the internal handle
3 — the Cranked lever
4 — the Activator of the uniform lock
5 — Zamkovaja a latch
6 — the Drummer
7 — the External handle of a door
8 — the lock Cylinder

Efforts of a tightening of carving connections, Nanometer

Т1: 6.4
Т2: 7.35
Т3: 18


Design of locks of a door of a back/cover of a luggage space

1 — the lock Cylinder
2 — Privodnoj a cable
3 — the Drummer
4 — the Latch
5 — a latch Cover
6 — the External handle of a door
7 — the Activator of the uniform lock

8 — the External handle of a door

Efforts of a tightening of carving connections, Nanometer

Т1: 7.5
Т2: 25


Internal handles of doors

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Remove the panel of an internal upholstery and изоляционную a door overlay (see Has undressed Removal and installation of panels of an internal upholstery of doors, including a back door (models Legacy the Versatile person and Outback) and a luggage space cover (models the Sedan)).
3. Remove two metal draughts, turn out the fixing screw and remove assemblage of the internal handle from the door panel.

4. Check up rods of draughts on presence of signs of deformations. Estimate smoothness of a course of the lever.
5. Installation is made upside-down.
6. In summary make sure of serviceability of functioning of a drive of the lock from the handle.


External handles of doors

Lateral doors


 PERFORMANCE ORDER

1. Remove assemblage замковой latches (see more low).
2. Give fixing bolts/nuts and remove assemblage of the external handle, - try not to bend at removal the handle panel.

3. Check up a draught rod on presence of signs of deformations, estimate smoothness of a course of the lever.
4. Installation is made upside-down.
5. In summary make sure of serviceability of functioning of a drive of the lock from the handle.


Back door (model Legacy of Universal/Outback)

 PERFORMANCE ORDER

1. Remove the bottom section of an internal upholstery of a door (see Has undressed Removal and installation of panels of an internal upholstery of doors, including a back door (models Legacy the Versatile person and Outback) and a luggage space cover (models the Sedan)).

2. Remove a rod of draught of a drive замковой latches, give a fixing nut and remove assemblage of the external handle of a door.

3. Check up a draught rod on presence of signs of deformations, estimate smoothness of a course of the lever.
4. Installation is made upside-down.
5. In summary make sure of serviceability of functioning of a drive of the lock from the handle.


Zamkovye latches

Forward doors

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Remove the panel of an internal upholstery and изоляционную a door overlay (see Has undressed Removal and installation of panels of an internal upholstery of doors, including a back door (models Legacy the Versatile person and Outback) and a luggage space cover (models the Sedan)).
3. Remove the internal handle of a door (see above).
4. Remove door glass (see Has undressed Removal, installation and adjustment of door glasses and components Glass lifts).
5. Give three nuts and remove a back directing trench of glass (see Has undressed Removal, installation and adjustment of door glasses and components Glass lifts).

6. Turn out three fixing screws and a bolt, disconnect electroconducting and take assemblage замковой latches from the door panel.

7. Check up a draught rod on presence of signs of deformations, estimate smoothness of a course of the lever.
8. Installation is made upside-down.
9. In summary check up serviceability of functioning of a latch.


Back doors

 PERFORMANCE ORDER

Installation details замковой latches of a back door are shown on an illustration.


Back door (model Legacy of Universal/Outback)

 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.
2. Remove the bottom panel of an internal upholstery of a door (see Has undressed Removal and installation of panels of an internal upholstery of doors, including a back door (models Legacy the Versatile person and Outback) and a luggage space cover (models the Sedan)).
3. Remove an executive rod of the cylinder of the lock.
4. Remove the external handle of a door (see above).

5. Turn out three fixing bolts, disconnect electroconducting and take a latch from the door panel.

6. Check up a draught rod on presence of signs of deformations, estimate smoothness of a course of the lever.
7. Installation is made upside-down.
8. In summary check up serviceability of functioning of a latch.


Luggage space cover (models the Sedan)

 PERFORMANCE ORDER

1. Remove an executive rod of the cylinder of the lock.

2. Remove a decorative cover, give a fixing nut and remove a latch.

And — the Decorative cover of a latch
In — the Latch

3. Estimate degree of deterioration of the drummer, check up serviceability of functioning of the safety lever and other moving components of a drive of the lock.
4. Examine components замковой assemblages on presence of signs of development of corrosion.
5. Installation is made upside-down. Grease rubbing elements.
6. In summary check up serviceability of functioning of a latch.


Activators of the uniform lock

The Onboard electric equipment see the Head.

The cowl lock


See Has undressed Removal, installation and adjustment of the lock of a cowl.

Handles of a drive remote отпускания замковых latches


Cowl


 PERFORMANCE ORDER

1. Disconnect приводной a cable from замковой latches.

2. Turn out a fixing bolt and remove located at the left under the panel of devices the drive lever отпускания latches of the lock of a cowl.

3. Installation is made upside-down.
4. Check up serviceability of functioning of a drive.


Door of a back/cover of a luggage space

 PERFORMANCE ORDER

1. Remove a back seat (see Has undressed Removal, service and installation of seats).
2. Remove the bottom panel of furnish of the central rack and a lateral cover of a threshold of the right door.
3. Remove the bottom panel of furnish of a back rack, unbend back a carpet covering of a floor and release a fastening clamp drive a cable (see Has undressed Removal and installation of elements of internal furnish).

4. Turn out a fixing bolt and remove the drive handle отпускания latches of the lock of a door of a back/cover of a luggage space.

5. Disconnect from the handle приводной a cable.

6. Remove the drummer of the lock and disconnect from it приводной a cable.

7. Installation is made upside-down.
8. Check up serviceability of functioning of a drive.


Cover лючка a jellied mouth of a fuel tank

 PERFORMANCE ORDER

1. Remove the right panel of back lateral furnish (see Has undressed Removal and installation of elements of internal furnish).

2. Develop to the left and remove located in the right back lateral panel of a body замковую assemblage.

3. Installation is made upside-down.
4. Check up serviceability of functioning of a drive.


Cylinders of locks

Forward doors

 PERFORMANCE ORDER

1. Remove assemblage of the external handle of a door (see above).

2. Release a clamp of fastening of a rod of draught and remove the lock cylinder.

3. Installation is made upside-down.


Back door (model Legacy of Universal/Outback)

 PERFORMANCE ORDER

1. Remove the bottom panel of an internal upholstery of a door (see Has undressed Removal and installation of panels of an internal upholstery of doors, including a back door (models Legacy the Versatile person and Outback) and a luggage space cover (models the Sedan)).

2. Release a clamp of fastening of a rod of draught and remove the lock cylinder.

3. Installation is made upside-down.


Luggage space cover (models the Sedan)

 PERFORMANCE ORDER

1. Remove the panel of an internal upholstery of a cover (see Has undressed Removal and installation of panels of an internal upholstery of doors, including a back door (models Legacy the Versatile person and Outback) and a luggage space cover (models the Sedan)).

2. Release a clamp of fastening of a rod of draught and remove the lock cylinder.

3. Installation is made upside-down.

On the main page