Subaru Legacy/Outback

1999-2003 of release

Repair and car operation



Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Service of loops and car locks
   Replacement wind and the other fixed glasses
   Removal and installation of a decorative lattice of a radiator
   Removal and installation of the panel of protection картера
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal and installation локеров protection of arches of forward wheels
   Removal and installation of lateral overlays кузовных panels
   Removal and installation forward обтекателя
   Removal and installation of a back spoiler
   Removal and installation of lateral spoilers
   Removal and installation profile directing the top luggage carrier
   Removal installation of the main ware box
   Removal and installation of elements of the central console
   Removal and installation of the panel of devices
   Removal and installation of panels of an internal upholstery of doors, including a back door (models Legacy the Versatile person and Outback) and a luggage space cover (models the Sedan)
   Removal and installation of elements of internal furnish
   Seat belts - the general information, condition check, removal and installation, an order of recycling not worked emergency натяжителей
   Removal, service and installation of seats
   Removal, installation and cowl adjustment
   Removal, installation and adjustment of the lock of a cowl
   Removal and installation of forward wings
   Removal, installation and adjustment of door panels
   Removal, service and installation of components of the top hatches
   Removal, installation and check of components замковых assemblages
   Removal, installation and adjustment of door glasses and components Glass lifts
   Removal, service and installation of rear-view mirrors
   Removal, service and installation of screen wipers and components of a path of giving of a washing liquid
   Control кузовные the sizes
+ Onboard electric equipment

Removal and installation of a forward bumper

Details of installation of a forward bumper

1 — a bumper Overlay
2 — a bumper Beam
3 — the Lateral rack
4 — the Lateral arm
5 — Covers

Efforts of a tightening of carving connections, Nanometer

Т: 70 ± 1


 PERFORMANCE ORDER

1. Details of installation of a forward bumper are presented on an illustration.
2. Open a cowl.
3. Disconnect a negative wire from the battery.
4. For the purpose of providing of access to fixing elements unbend forward edges локеров protection of wheel arches.
5. Take the bottom lateral plastic clamps of fastening of an overlay of a bumper (on two from each party of a bumper).
6. Take the top and bottom plastic clamps, slightly delay an overlay of a bumper and disconnect electroconducting from antifog headlights.
7. Remove a bumper overlay, give two fixing nuts and remove a bumper beam
8. Installation is made upside-down. Track, that fixing nuts have been tightened with demanded effort.


On the main page