Subaru Legacy/Outback

1999-2003 of release

Repair and car operation



Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Service of loops and car locks
   Replacement wind and the other fixed glasses
   Removal and installation of a decorative lattice of a radiator
   Removal and installation of the panel of protection картера
   Removal and installation of a forward bumper
   Removal and installation of a back bumper
   Removal and installation локеров protection of arches of forward wheels
   Removal and installation of lateral overlays кузовных panels
   Removal and installation forward обтекателя
   Removal and installation of a back spoiler
   Removal and installation of lateral spoilers
   Removal and installation profile directing the top luggage carrier
   Removal installation of the main ware box
   Removal and installation of elements of the central console
   Removal and installation of the panel of devices
   Removal and installation of panels of an internal upholstery of doors, including a back door (models Legacy the Versatile person and Outback) and a luggage space cover (models the Sedan)
   Removal and installation of elements of internal furnish
   Seat belts - the general information, condition check, removal and installation, an order of recycling not worked emergency натяжителей
   Removal, service and installation of seats
   Removal, installation and cowl adjustment
   Removal, installation and adjustment of the lock of a cowl
   Removal and installation of forward wings
   Removal, installation and adjustment of door panels
   Removal, service and installation of components of the top hatches
   Removal, installation and check of components замковых assemblages
   Removal, installation and adjustment of door glasses and components Glass lifts
   Removal, service and installation of rear-view mirrors
   Removal, service and installation of screen wipers and components of a path of giving of a washing liquid
   Control кузовные the sizes
+ Onboard electric equipment





Removal, service and installation of rear-view mirrors

 The description of procedures of removal and installation of switches of management by functioning of the electric drive of door mirrors is resulted in the Head the Onboard electric equipment.


Internal mirror

Removal and installation

 PERFORMANCE ORDER

1. Develop a mirror support under 90 in any direction and, having pulled downwards, remove it from the basis pasted on glass.

2. Take from assemblage of the basis of a support of a mirror a spring.

3. Check up a condition of glass and a basis spring, defective components replace.
4. Installation is made upside-down.


External mirrors

Removal and installation


 PERFORMANCE ORDER

1. Remove the panel of an internal upholstery of a door (see Has undressed Removal and installation of panels of an internal upholstery of doors, including a back door (models Legacy the Versatile person and Outback) and a luggage space cover (models the Sedan)).

2. Unbend a corner изоляционной overlays and disunite a contact socket of electroconducting of a mirror.

3. Turn out fixing screws and remove assemblage of a mirror from a door.

4. Installation is made upside-down.


Replacement has flown down

 PERFORMANCE ORDER

1. Remove assemblage of a mirror from a door (see above).

2. Warm up the hair dryer the holder to a softening of its edges, at use of the hair dryer by capacity of 1 kw the sufficient warming up of the holder occurs already after two-three minutes.

3. Hooking a stupid screw-driver, separate glass from the holder. On models with heating of mirrors disconnect from the back party has flown down electroconducting of a thermoelectric heating element.
4. Again warm up a surface of the holder the hair dryer, remove a film from a bilaterial adhesive tape of fastening of glass and densely press the last to the holder.

 Refusal of preliminary warming up of the holder is interfaced to risk damage of its edges, or splitting of glass of a mirror!

5. Establish mirror assemblage the regular place (see above).

On the main page