Subaru Legacy/Outback

1. Remove a forward top overlay.
2. Remove the top panel of furnish of a forward rack.
3. Remove an anchor of humeral section of a forward seat belt, then release clamps and remove the top panel of furnish of the central rack.

4. Installation is made upside-down, - track correctness of input of the top overlay in gearing with the top panels of furnish of forward and central racks. Make sure of reliability защелкивания clamps.

1. Remove a back top overlay.

2. Turn out fixing bolts and remove a top level stoplight.

3. Remove a back of a back seat (see Has undressed Removal, service and installation of seats).

4. Remove equipped with a buckle анкерную section of the right seat belt and disconnect it from humeral section of the central belt.

5. Through grooves and the central window in the finishing panel of a back shelf liberate humeral sections of seat belts, then release clamps and remove the panel.

6. Remove the top cover of an overlay of a threshold of a back door (see more low).
7. Remove the bottom panel of furnish of a back rack.
8. Remove the top panel of furnish of a back rack.

1. Remove the top cover of an overlay of a threshold of a back door (see more low).
2. Remove the panel of furnish of a back skirt.
3. Turn out fixing screws, release clamps and remove the basic section of the back lateral panel of furnish.
4. Remove a back top overlay.
5. Turn out fixing screws and remove the top section of the back lateral panel of furnish.
6. Remove the top cross-section panel of furnish.

Installation is made upside-down, - track correctness of input of the top overlay in gearing with the top panel of furnish of a back rack / the top section of the panel of back lateral furnish. Make sure of reliability защелкивания clamps.

1. Remove the bottom panel of furnish of a forward rack.
2. Remove the bottom cover of an overlay of a threshold of a forward door.
3. Remove (models the Sedan) / lift (models Legacy of Universal/Outback) a pillow of a back seat (see Has undressed Removal, service and installation of seats), then remove the top cover of an overlay of a threshold of a back door.
4. Remove the bottom cover of an overlay of a threshold of a back door.
5. Remove the bottom panel of furnish of the central rack.
6. Installation is made upside-down, - track reliability защелкивания clamps.

2. Installation is made upside-down.

1. Disconnect a negative wire from the battery.
2. Remove the switch of management of functioning of the electric drive of the top hatch (the Onboard electric equipment see the Head).
3. Remove the ceiling fixture (the Onboard electric equipment see the Head).
4. Remove sun-protection peaks and their loopy hooks (see above).

5. Turn out fixing bolts and remove the top hand-rail.

6. Remove lateral elements of furnish of top level of forward and back parts of salon (see above).

Necessity for removal of furnish of a back shelf in this case, naturally, no.

7. Take fixing clamps and remove the panel of a ceiling upholstery.

2. Disconnect a negative wire from the battery.
3. At a corresponding complete set of the car remove the switch of management of functioning of the electric drive of the top hatch (the Onboard electric equipment see the Head).
4. Remove the main ceiling fixture and a lantern of illumination of a luggage space (the Onboard electric equipment see the Head).
5. Remove sun-protection peaks and their loopy hooks (see above).
6. Turn out fixing bolts and remove the top hand-rail.
7. Remove lateral elements of furnish of top level of forward and back parts of salon (see above).

8. Accurately having released the clamp lock, uncover and, having pushed in a pocket in a ceiling upholstery, liberate from an opposite side equipped замковой скобой the basic section of the central seat belt of a back seat. And — the Cover In — the Seat belt

9. Take fixing clamps and remove the panel of a ceiling upholstery.

Installation is made in an order, the return to an order of dismantle of components, - track reliability защелкивания clamps.

1. Release fixing clamps and remove the back panel of furnish of a luggage space.
2. Having turned out the fixing screw, remove an angular hook, inventions release clamps and remove the lateral panel of furnish of a luggage space.
3. Installation is made upside-down, - track reliability защелкивания clamps.

1. Remove forward seats (see Has undressed Removal, service and installation of seats).
2. Remove a pillow of a back seat (see Has undressed Removal, service and installation of seats).
3. Remove a console box (see Has undressed Removal and installation of elements of the central console).
4. Remove elements of furnish of the bottom level of salon (see above).

5. Take plastic clamps of fastening of the carpet panel of a covering of a floor.

6. Remove fixing hook and unbend forward edges of the carpet panel in foot wells of the driver and the forward passenger.
7. Remove the carpet panel from a sleeve of giving of hot air in a back part of salon.
8. Curtail the carpet panel and take it from car salon. Through a back door.
9. Installation is made upside-down, - track reliability защелкивания clamps, do not forget to fill lateral edges of the carpet panel in reception grooves in covers of overlays of door thresholds.

1. Open a luggage space cover.

2. Simply lift the carpet panel and remove it from the car.

3. Installation is made upside-down.

2. Take forward clamps and remove panels and remove forward section of the carpet panel.
3. Installation is made upside-down, - track reliability защелкивания clamps.