Subaru Legacy/Outback

1. Details of installation of a back bumper on models Legacy the Sedan are presented on an illustration.
2. Поддомкратьте a back of the car also establish it on props.

3. Turn out bolts and take фикдоступ to which opens from under the car.

4. Release clamps and remove an overlay from a bottom edge of an aperture of a luggage space.

5. For the purpose of a possibility of procrastination of back edges of panels of a lateral upholstery of a luggage space, remove established in the top corners of an aperture hooks. And — the Hook

6. Unbend back edges of lateral panels of furnish and give four (on two from each party of the panel of a back) nuts of fastening of assemblage of a back bumper.

7. Take the top clamps and separate an overlay of a bumper from a bearing beam.

1. Details of installation of a back bumper on models Legacy of Universal/Outback are presented on an illustration.
2. Поддомкратьте a back of the car also establish it on props.

3. Turn out bolts and take clamps of fastening of an overlay of a bumper access to which opens from under the car.

4. Remove the lateral panels of a floor of a luggage space equipped with boxes (see Has undressed Removal and installation of elements of internal furnish), unbend back edges of panels of a lateral upholstery of a luggage space and remove protective covers of heads of back bolts.

5. Release four (under two from each party of a luggage space) fixing болтаи remove assemblage of a back bumper from the car.

6. Take the remained top and bottom clamps and separate an overlay from a bumper beam.