Subaru Legacy/Outback

1999-2003 of release

Repair and car operation


Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
- Automatic transmission
   Specifications
   Electrohydraulic control system - the general information, appointment of basic elements
   Self-diagnostics system - the general information and functioning principles
   Diagnostics of general condition АТ
   Problem diagnostics АТ
   Removal and installation трансмиссионной assemblages
   Replacement of elements of a suspension bracket трансмиссионной assemblages
   Replacement of an epiploon of a casing of lengthening АТ
   Condition check, adjustment and replacement of the gauge-switch of the permission of start
   Removal and installation of the forward gauge of speed (VSS)
   Removal and installation of the back gauge of speed (VSS)
   Removal and installation of the gauge of turns of the turbine of the hydrotransformer
   Removal, service and installation клапанной assemblages
   Replacement of electromagnetic valves of switching, executive electromagnetic valves and the gauge of temperature ATF
   Filter ATF replacement
   Removal and installation of the module of management of transmission (TCM)
   Removal, installation and check of a condition of lines of a path of cooling ATF
   Removal, service and installation of components of the lever of selector AT
   Removal, installation, check of a condition and adjustment drive selector AT cable
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal, installation and check of a condition of lines of a path of cooling ATF

REMOVAL

 PERFORMANCE ORDER

1. Tyre out the car on the lift.
2. Remove the storage battery and the tank of a liquid of washing of glasses (the Body see the Head).
3. Lift the car.
4. Remove protection картера (the Body see the Head).
5. Disconnect a hose of a path of cooling ATF from a radiator.

 Do not hook a hose the pointed subjects! In case of occurrence of difficulties wind the end of a hose with rags and after прокручивания flat-nose pliers, remove his hands.

6. Disconnect hoses of a path of cooling ATF from tubes/transmissions.


Models 2.0 and 2.5 l

 PERFORMANCE ORDER

1. Lift the receiver a path of cooling ATF from a frame.

2. Remove inlet and final tubes маслоохладителя.

 е lose balls and the springs used together with screws.


A — the Inlet tube
B — the Final tube


L models 3.0

 PERFORMANCE ORDER

1. Remove локер protection of an arch of the left forward wheel (the Body see the Head).
2. Disconnect hoses of a path of cooling ATF from filter ATF.

3. Disconnect a tube of a path of cooling ATF from a frame.

4. Remove inlet and final tubes маслоохладителя.

INSTALLATION

 PERFORMANCE ORDER

Installation is made in an order, the return to an order of dismantle of components. Track, that all fixture has been tightened with demanded effort, and hoses have not been overwound or bent.

CHECK

 PERFORMANCE ORDER

1. Check up places of connection of hoses to tubes, a radiator and transmission on presence of signs of development of leaks ATF.
2. Make sure of integrity and reliability of a tightening of collars.
3. Slightly bending hoses, check up them on presence of cracks and other damages.
4. To the touch estimate elasticity of hoses, especially in fixing places their collars.
5. Replace the failed components.


On the main page