Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
- 11. Brake system
   11.1. A technical characteristics
   + 11.2. Prorolling of hydraulic brake system
   11.3. Brake pipelines and hoses
   + 11.4. Lobbies brake Pads
   11.5. Replacement back brake колодок on disk brakes
   11.6. Replacement back brake колодок on drum-type brakes
   11.7. Check, removal and installation of a forward brake disk
   11.8. Check, removal and installation of a back brake disk
   11.9. Removal, check and installation of a brake drum
   + 11.10. A support of a forward brake
   + 11.11. A support of a back disk brake
   + 11.12. The back working brake cylinder
   + 11.13. The main brake cylinder
   + 11.14. Valves of adjustment of pressure
   11.15. Replacement of the unidirectional valve of the vacuum amplifier of brakes
   11.16. Check, removal and installation of the vacuum amplifier of brakes
   11.17. Removal and installation of a pedal of a brake
   11.18. Removal and installation of a cable of a manual brake
   11.19. Removal and installation of the lever of a manual brake
   11.20. Replacement brake колодок a manual brake on back disk brakes
   + 11.21. Antiblocking system of brakes (ABS)
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





11.19. Removal and installation of the lever of a manual brake

Removal

PERFORMANCE ORDER
1. Unscrew a nut of fastening of the jack of cables of a manual brake and remove the jack.
2. Remove a rubber protective cover from draught.
3. Remove sitting of the driver for what unscrew bolts of fastening of directing sitting to a floor.
4. Remove заглушку and unscrew the unique screw, крепящий the central console.
5. Remove switches Glass lifts and a mirror with an electric drive, then move the central console back.
6. Cut a carpet covering of a floor.
7. Unscrew two bolts and remove the lever of a manual brake.
8. Unscrew from the lever the switch of a control lamp of the tightened manual brake.
9. If necessary replace a ratchet and gear sector, but thus for removal and their installation it is necessary to use plugs and rivets.

Installation

PERFORMANCE ORDER
1. Establish the lever of a manual brake into place and fix its bolts, having tightened their demanded moment.
2. Fix a carpet covering of a floor glue or a sticky tape.
3. Establish switches on the central console, then establish the console into place and fix its screw.
4. Establish forward sitting.
5. Establish a rubber protective cover and the jack.
6. Adjust a manual brake.

On the main page