Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
- 11. Brake system
   11.1. A technical characteristics
   + 11.2. Prorolling of hydraulic brake system
   11.3. Brake pipelines and hoses
   - 11.4. Lobbies brake Pads
      11.4.1. Check brake колодок
      11.4.2. Replacement of lobbies brake колодок
   11.5. Replacement back brake колодок on disk brakes
   11.6. Replacement back brake колодок on drum-type brakes
   11.7. Check, removal and installation of a forward brake disk
   11.8. Check, removal and installation of a back brake disk
   11.9. Removal, check and installation of a brake drum
   + 11.10. A support of a forward brake
   + 11.11. A support of a back disk brake
   + 11.12. The back working brake cylinder
   + 11.13. The main brake cylinder
   + 11.14. Valves of adjustment of pressure
   11.15. Replacement of the unidirectional valve of the vacuum amplifier of brakes
   11.16. Check, removal and installation of the vacuum amplifier of brakes
   11.17. Removal and installation of a pedal of a brake
   11.18. Removal and installation of a cable of a manual brake
   11.19. Removal and installation of the lever of a manual brake
   11.20. Replacement brake колодок a manual brake on back disk brakes
   + 11.21. Antiblocking system of brakes (ABS)
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





11.4. Lobbies brake Pads

11.4.1. Check brake колодок
THE GENERAL DATA

The prevention

Necessarily make replacement of all колодок on one axis of the car even if deterioration borders were reached only by one колодка. If Pads will be repeatedly established, before removal they are necessary for marking.

At work brake колодок the brake dust which contains asbestos, unhealthy is formed, therefore at clearing brake колодок do not use compressed air and do not inhale a dust.


PERFORMANCE ORDER
1. At presence remove caps of forward wheels and ослабьте bolts of fastening of wheels.
2. Tighten a manual brake, then lift a forward part of the car and fix on supports.
3. Remove wheels.
4. Turn a steering wheel to the right against the stop and check up a thickness and a condition of overlays brake колодок the right brake.
5. Turn a steering wheel to the left against the stop and check up a thickness and a condition of overlays brake колодок the left brake.
6. Even if deterioration borders were reached only by one brake колодка, replace all lobbies brake Pads in the complete set.

On the main page