Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
- 11. Brake system
   11.1. A technical characteristics
   + 11.2. Prorolling of hydraulic brake system
   11.3. Brake pipelines and hoses
   + 11.4. Lobbies brake Pads
   11.5. Replacement back brake колодок on disk brakes
   11.6. Replacement back brake колодок on drum-type brakes
   11.7. Check, removal and installation of a forward brake disk
   11.8. Check, removal and installation of a back brake disk
   11.9. Removal, check and installation of a brake drum
   + 11.10. A support of a forward brake
   - 11.11. A support of a back disk brake
      11.11.1. Support removal
      11.11.2. Support repair
      11.11.3. Support installation
   + 11.12. The back working brake cylinder
   + 11.13. The main brake cylinder
   + 11.14. Valves of adjustment of pressure
   11.15. Replacement of the unidirectional valve of the vacuum amplifier of brakes
   11.16. Check, removal and installation of the vacuum amplifier of brakes
   11.17. Removal and installation of a pedal of a brake
   11.18. Removal and installation of a cable of a manual brake
   11.19. Removal and installation of the lever of a manual brake
   11.20. Replacement brake колодок a manual brake on back disk brakes
   + 11.21. Antiblocking system of brakes (ABS)
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





11.11. A support of a back disk brake

11.11.1. Support removal
PERFORMANCE ORDER
1. At presence remove caps of wheels.
2. Then ослабьте bolts of fastening of back wheels.
3. Lift a back part of the car and fix on supports.
4. Remove back wheels.
5. Remove brake Pads.
6. For reduction of losses of a brake liquid uncover with пополнитльного a tank of brake system, close a mouth of a tank polyethylene and again screw a cover. It is necessary that the cover tightly closed пополнительный a tank.
7. Clear area round connecting муфты, a brake tube and a support.
8. Unscrew connecting муфту, крепящую a brake tube to a back part of a support and disconnect a brake tube. Be careful and do not deform a brake tube.
9. Close an aperture in a support and a brake tube suitable stoppers.
10. Unscrew two bolts and remove a support from a fixing element of a nave.

On the main page