Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
- 4. The engine
   - 4.1. Engine OHV (with a camshaft in the block of cylinders)
      4.1.1. A technical characteristics
      4.1.2. Compression check
      4.1.3. The repair operations which are not demanding removal of the engine
      + 4.1.4. The repair operations demanding removal of the engine
      4.1.5. Adjustment of backlashes of valves
      + 4.1.6. A head of the block of cylinders
      4.1.7. Removal and installation of the oil pallet
      + 4.1.8. The oil pump
      + 4.1.9. Mechanism asterisks timing
      + 4.1.10. Pistons and rods
      4.1.11. Removal and flywheel installation
      4.1.12. Removal and installation of support of the power unit
      4.1.13. Removal and installation of a camshaft and pushers
      4.1.14. Removal and installation of a back sealing ring of a cranked shaft
      4.1.15. Removal and installation of a cranked shaft and radical bearings
      - 4.1.16. Check of elements of the engine
         4.1.16.1. Check of a cranked shaft
         4.1.16.2. Survey radical and шатунных bearings
         4.1.16.3. Check of pistons and rods
         4.1.16.4. Check of a camshaft and bearings
         4.1.16.5. Check of asterisks, a chain and the tension mechanism
         4.1.16.6. Check коромысел and pushers
         4.1.16.7. Flywheel check
      4.1.17. System of greasing of the engine
      4.1.18. Removal and engine installation
      4.1.19. Start of the engine after major repairs
   + 4.2. Engines OHC
   + 4.3. Engine DOHC with 16 valves
   + 4.4. Diesel engines 16D and 16DА
   + 4.5. Diesel engines of 1,7 l
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





4.1.16.4. Check of a camshaft and bearings
PERFORMANCE ORDER
1. Check up working surfaces of bearings of a camshaft and contours of cams of a camshaft on deterioration and presence of dot corrosion. In the presence of any deterioration replace a camshaft.
2. After camshaft removal check up a condition of bearings of a camshaft on presence of deterioration and dot corrosion. In the presence of defects it is necessary to replace three bearings of a camshaft. Check up that camshaft bearings are established by appropriate amount and flutes for oil giving pure.
3. Check up a condition of the plate fixing a camshaft, and in the presence of development replace it.

On the main page