Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
- 11. Brake system
   11.1. A technical characteristics
   + 11.2. Prorolling of hydraulic brake system
   11.3. Brake pipelines and hoses
   + 11.4. Lobbies brake Pads
   11.5. Replacement back brake колодок on disk brakes
   11.6. Replacement back brake колодок on drum-type brakes
   11.7. Check, removal and installation of a forward brake disk
   11.8. Check, removal and installation of a back brake disk
   11.9. Removal, check and installation of a brake drum
   - 11.10. A support of a forward brake
      11.10.1. Support removal
      + 11.10.2. Support repair
      11.10.3. Support installation
   + 11.11. A support of a back disk brake
   + 11.12. The back working brake cylinder
   + 11.13. The main brake cylinder
   + 11.14. Valves of adjustment of pressure
   11.15. Replacement of the unidirectional valve of the vacuum amplifier of brakes
   11.16. Check, removal and installation of the vacuum amplifier of brakes
   11.17. Removal and installation of a pedal of a brake
   11.18. Removal and installation of a cable of a manual brake
   11.19. Removal and installation of the lever of a manual brake
   11.20. Replacement brake колодок a manual brake on back disk brakes
   + 11.21. Antiblocking system of brakes (ABS)
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





11.10.3. Support installation
PERFORMANCE ORDER
1. On supports GMF and early updatings of support АТЕ clear a carving of bolts of fastening of a support and an aperture for bolts on a rotary fist.
2. Put on a carving of bolts a thin layer of the means interfering unscrewing of bolts.
3. Establish a support and fix bolts, having tightened their demanded moment.
4. Establish brake Pads.
5. Connect to a support a brake hose and fix its connecting bolt with new sealing washers.
6. Remove a clip from a brake hose or polyethylene with пополнительного a tank and pump over a corresponding brake contour.
7. Establish a wheel and lower the car on the earth.
8. Tighten bolts of fastening of a wheel the demanded moment.

On the main page