Subaru Legacy/Outback

1999-2003 of release

Repair and car operation



Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
+ Routine maintenance
- The engine
   Specifications
   Check компрессионного pressure in cylinders and tightness of the block
   Diagnostics of a condition of the engine with vacuum gauge application
   System of greasing of the engine - the general information
   + The procedures of the repair which has been not connected with extraction of the engine from the car, - four-cylinder engines
   - The procedures of the repair which has been not connected with extraction of the engine from the car, - six-cylinder engines
      Reduction of the piston of the first cylinder in position ВМТ
      Check and adjustment клапанных backlashes
      Removal and installation of a pulley of a cranked shaft
      Removal and installation of covers of drive ГРМ
      Removal and installation газораспределительных chains
      Removal and installation of asterisks of a drive of camshafts
      Removal and installation of an asterisk of a cranked shaft
      Automatic натяжитель газораспределительной chains - the general information
      Removal and installation of camshafts
      Removal and installation of heads of cylinders
      Removal and installation of the bottom section of the pallet картера and маслозаборника
      Removal, service and installation of the oil pump
      Service редукционного the valve of the oil pump
      Check of pressure of impellent oil
      Removal and installation of the gauge-switch of pressure of oil
      Removal and installation маслоохладителя
      Removal and installation drive a disk
      Replacement of support of a suspension bracket of the power unit
   + The general and major repairs of engines
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Check of pressure of impellent oil

Electric schemes of indication of pressure of impellent oil in 6-cylinder engines are presented on illustrations.

The electric scheme of indication of pressure of impellent oil in 6-cylinder engines of models 2001 of release


The electric scheme of indication of pressure of impellent oil in 6-cylinder engines of models 2002 of release


 PERFORMANCE ORDER

1. Execute the checks described in paragraphs 2 and 3 Check of pressure of impellent oil Has undressed.
2. Turn a key in the ignition lock in position OFF, remove a combination of devices and measure resistance between plugs C13-C3 and С13-А18 (models 20001 вып.)/С10-В5 and С10-А8 (models 2002 вып.). If the result of measurement makes less than 10 Ohm, replace an electroconducting socket between a combination of devices and the gauge-switch of pressure of impellent oil. Otherwise repair or replace a combination of devices and a control lamp of pressure of oil.

On the main page