Audi A3

Since 1997 of release

Repair and car operation



Audi A3
+ The maintenance instruction
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Manual box of a gear change
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Electric equipment of system of comfort
   Diagnostics of malfunctions of an onboard electric equipment - the general information
   Check of the electric motor of a screen wiper
   Check of warmed back glass
   Stoplight check
   Removal, installation and check of a sound signal
   Safety locks
   Fusible inserts - the general information
   Chain breakers (thermal relays)
   The relay
   Replacement of batteries of a key of remote control
   Replacement of the battery/lamp of a key with illumination
   Anticreeping blocking
   Illumination devices
   Replacement of lamps of external illumination
   Replacement of bulbs of internal illumination
   Removal and headlight installation
   Removal and installation of the electric motor of adjustment of range of light
   Removal and installation of the forward index of turn
   Removal and installation of a back lantern
   Adjustment of light of headlights
   Devices
   Removal and control panel installation
   Removal and installation подрулевого the switch
   Removal and installation of switches and lamps
   Removal, installation and radio receiver coding
   Input of a code of a radio receiver
   Removal and loudspeaker installation
   Removal and installation of the aerial of a roof
   Additional installation of a radio telephone on in special way prepared models
   Removal and installation of the electric motor of a forward screen wiper
   Removal and installation of the lever and the electric motor of a back screen wiper
   Removal and installation of a cleaner of back glass
   Removal and installation of the tank from the pump стеклоомывателя
   Elements темпостата
+ Electroschemes


https://www.youtube.com/channel/UCoah5uA-uF-j35-MalVTfRQ


Replacement of bulbs of internal illumination

Lamp of internal illumination/illumination of reading

PERFORMANCE ORDER
1. Cautiously remove fingers in front рассеиватель the fixture consisting of three parts.
2. Take out from a cartridge defective spotlights and replace it. Thus watch reliable position of a lamp, if necessary turn in contacts.
3. Take out a defective lamp of illumination of reading and replace.
ATTENTION

If the new lamp is not inserted into a cartridge, remove the case. For this purpose turn away screws of fastening of the case a screw-driver with a crosswise tip. On a case underside turn a cartridge of a lamp of illumination on 90 (1/4 turns) to the right and take out. Insert into a cartridge a new lamp. Insert a cartridge into the case and fix, having turned to the left. Fix the fixture case.


4. Insert рассеиватель and fix it.

Lamp of illumination of a prophetic box


PERFORMANCE ORDER
1. Open a ware box.
2. Insert a narrow screw-driver into a groove of the fixture and cautiously take out a lamp.
3. Compress a clamp of the tip and remove a lamp.
4. Take out damaged софитную a lamp from a cartridge and replace. Thus watch reliability of fixing of a lamp, if necessary turn in contact clips.
5. Turn in the deformed spring of the case of a lamp in a case outer side.
6. Join a socket and fix it.
7. Insert a lamp into an aperture.
8. Close a ware box.

Lamp of illumination of a back part of salon


PERFORMANCE ORDER
1. Insert a flat screw-driver sideways behind a lamp and press a stopper–1 on a salon ceiling (an arrow on an illustration). The second variant: press fingers on a lamp from outside the switch, having compressed a spring–1, and take out it from outside the switch.
2. Remove the fixture.
3. Расстыкуйте a socket–3.
4. Take out from a cartridge the damaged lamp spotlights–4 and replace it. Thus watch reliability of fastening of a lamp, if necessary turn in contact clips.
5. If it is necessary, turn in a lock spring in a direction of an outer side of the case.
6. Join and fix a socket.
7. Insert at first the fixture both hooks–2 into an aperture in a salon ceiling. On the other hand press and fix a lamp (marksman).

Lamp of illumination of a luggage carrier


With right and a luggage carrier left-hand side in боковинах are located on one lamp of illumination of a luggage carrier.

PERFORMANCE ORDER
1. Insert a flat screw-driver behind into a groove on рассеивателе. For protection against damages put a rag between a screw-driver and facing.
2. Cautiously remove the fixture.
3. Расстыкуйте a socket.
4. Take out from a cartridge damaged софитную a lamp and replace it. Watch reliability of fastening of a lamp, if necessary turn in contact clips.
5. If it is necessary, turn in a lock spring in a direction of an outer side of the case.
6. Join and fix a socket.
7. Insert a lamp of illumination of a luggage carrier electric connections at first into an aperture боковины and then press on the other hand.
On the main page