Audi A3

Since 1997 of release

Repair and car operation



Audi A3
+ The maintenance instruction
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Manual box of a gear change
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Electric equipment of system of comfort
   Diagnostics of malfunctions of an onboard electric equipment - the general information
   Check of the electric motor of a screen wiper
   Check of warmed back glass
   Stoplight check
   Removal, installation and check of a sound signal
   Safety locks
   Fusible inserts - the general information
   Chain breakers (thermal relays)
   The relay
   Replacement of batteries of a key of remote control
   Replacement of the battery/lamp of a key with illumination
   Anticreeping blocking
   Illumination devices
   Replacement of lamps of external illumination
   Replacement of bulbs of internal illumination
   Removal and headlight installation
   Removal and installation of the electric motor of adjustment of range of light
   Removal and installation of the forward index of turn
   Removal and installation of a back lantern
   Adjustment of light of headlights
   Devices
   Removal and control panel installation
   Removal and installation подрулевого the switch
   Removal and installation of switches and lamps
   Removal, installation and radio receiver coding
   Input of a code of a radio receiver
   Removal and loudspeaker installation
   Removal and installation of the aerial of a roof
   Additional installation of a radio telephone on in special way prepared models
   Removal and installation of the electric motor of a forward screen wiper
   Removal and installation of the lever and the electric motor of a back screen wiper
   Removal and installation of a cleaner of back glass
   Removal and installation of the tank from the pump стеклоомывателя
   Elements темпостата
+ Electroschemes



Removal and headlight installation

THE GENERAL DATA

Headlight with the mechanism of adjustment of range of light

1 – clips (6 pieces)
2 – рассеиватель
3 – consolidation рассеивателя
4 – the headlight case
5 – a passing light lamp
6 – a socket
7 – the electric motor of adjustment of range of light
8 – a parking light lamp
9 – a lamp of a headlight or a headlight with antifog light
10 – a socket
11 – consolidation of a cover of the case
12 – the case

Back lantern

1 – the case of a back lantern
2 – a lamp of a stop-signal of a lantern
3 – a lamp of a lantern of a backing
4 – nuts, 4 Н•м
5 – a body
6 – the holder of a lamp
7 – a lamp of a foggy lantern
8 – a lamp of a signal of turn

Back lantern

Рассеиватель and the headlight case can be replaced independently from each other.

REMOVAL

PERFORMANCE ORDER
1. Remove the turn index, address to subsection Removal and installation of the forward index of turn.
2. For an exception of damage of a paint and varnish covering at headlight removal paste over a bumper around a headlight.
3. Turn out lateral bolts of fastening (the marksman on an illustration) key Torx Т30.
4. Turn out the top bolts of fastening by-1 key Torx T30.
5. Turn a headlight–2 to the centre of the car (marksman) and then take out forward from a body.
6. Расстыкуйте a socket of a headlight and adjustment of range of light.

INSTALLATION

PERFORMANCE ORDER
1. Insert a headlight at first around the central part of the car a pin–1 in directing–2.
2. Join a socket of a headlight and the mechanism of adjustment of range of light.
3. Slightly fix a headlight, expose it on a contour of a body and tighten the moment 6 Н•м.
4. Establish the turn index, address to subsection Removal and installation of the forward index of turn.
5. Check up headlight adjustment on HUNDRED.
On the main page