Audi A3
+ The maintenance instruction
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Manual box of a gear change
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
Electric equipment of system of comfort
Diagnostics of malfunctions of an onboard electric equipment - the general information
Check of the electric motor of a screen wiper
Check of warmed back glass
Stoplight check
Removal, installation and check of a sound signal
Safety locks
Fusible inserts - the general information
Chain breakers (thermal relays)
The relay
Replacement of batteries of a key of remote control
Replacement of the battery/lamp of a key with illumination
Anticreeping blocking
Illumination devices
Replacement of lamps of external illumination
Replacement of bulbs of internal illumination
Removal and headlight installation
Removal and installation of the electric motor of adjustment of range of light
Removal and installation of the forward index of turn
Removal and installation of a back lantern
Adjustment of light of headlights
Devices
Removal and control panel installation
Removal and installation подрулевого the switch
Removal and installation of switches and lamps
Removal, installation and radio receiver coding
Input of a code of a radio receiver
Removal and loudspeaker installation
Removal and installation of the aerial of a roof
Additional installation of a radio telephone on in special way prepared models
Removal and installation of the electric motor of a forward screen wiper
Removal and installation of the lever and the electric motor of a back screen wiper
Removal and installation of a cleaner of back glass
Removal and installation of the tank from the pump стеклоомывателя
Elements темпостата
+ Electroschemes
|
Removal and installation of the lever and the electric motor of a back screen wiper The lever of a back screen wiper
1 – a brush
2 – a cap
3 – a nut, 16 Н•м
4 – a spring washer | 5 – the cleaner lever
6 – a nozzle
7 – an electric motor power shaft
8 – brush rubber | The electric motor of a back cleaner
1 – the electric motor
2 – sealing rubber
3 – an aperture in back glass
4 – a nozzle
5 – a power shaft of a back cleaner | 6 – a connecting tube
7 – a socket
8 – nuts, 3 pieces, a key of 10 mm
9 – a water hose
10 – an electric motor cover |
The lever of a back screen wiper REMOVAL
| PERFORMANCE ORDER |
| 1. Cautiously hook a small screw-driver and remove a cap–2. | | 2. Turn away a nut–3 and remove together with a spring washer–4. | | 3. Remove the lever–6 from a shaft of the electric motor–7. | |
INSTALLATION
| PERFORMANCE ORDER |
| 1. Switch off the switch of the electric motor of a screen wiper. | | 2. Establish the lever so that rubber–8 was on distance of 5 mm from ceramics. |
| 3. Tighten the lever the moment 8 Н•м and put on a cap. | | 4. Include a cleaner of back glass, if necessary rearrange it. |
|
The electric motor of a back cleaner REMOVAL |
PERFORMANCE ORDER |
| 1. Remove the lever. |
| 2. Remove internal facing of a door of a back, address to subsection Removal and installation of facing of a door of a back. | | 3. Расстыкуйте a socket–7. | | 4. Cautiously remove a hose for water–9 from a connecting tube–6. |
| 5. Turn away a nut–8 and remove the electric motor of a cleaner–1. | | | |
INSTALLATION
| PERFORMANCE ORDER |
| 1. Cautiously insert sealing rubber–2 into an aperture of back glass–3. | | 2. Cautiously insert the electric motor into sealing rubber–2 and press its moment 8 Н•м to a finger. | | 3. The further installation is made in sequence, return to removal. |
|
|
On the main page
|