Audi A3

Since 1997 of release

Repair and car operation

Audi A3
+ The maintenance instruction
+ Current leaving and service
+ The engine
+ Systems of cooling, heating
+ The power supply system and release of the fulfilled gases
+ Engine electric equipment
+ Manual box of a gear change
+ Automatic transmission and models with a full drive
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   Electric equipment of system of comfort
   Diagnostics of malfunctions of an onboard electric equipment - the general information
   Check of the electric motor of a screen wiper
   Check of warmed back glass
   Stoplight check
   Removal, installation and check of a sound signal
   Safety locks
   Fusible inserts - the general information
   Chain breakers (thermal relays)
   The relay
   Replacement of batteries of a key of remote control
   Replacement of the battery/lamp of a key with illumination
   Anticreeping blocking
   Illumination devices
   Replacement of lamps of external illumination
   Replacement of bulbs of internal illumination
   Removal and headlight installation
   Removal and installation of the electric motor of adjustment of range of light
   Removal and installation of the forward index of turn
   Removal and installation of a back lantern
   Adjustment of light of headlights
   Removal and control panel installation
   Removal and installation подрулевого the switch
   Removal and installation of switches and lamps
   Removal, installation and radio receiver coding
   Input of a code of a radio receiver
   Removal and loudspeaker installation
   Removal and installation of the aerial of a roof
   Additional installation of a radio telephone on in special way prepared models
   Removal and installation of the electric motor of a forward screen wiper
   Removal and installation of the lever and the electric motor of a back screen wiper
   Removal and installation of a cleaner of back glass
   Removal and installation of the tank from the pump стеклоомывателя
   Elements темпостата
+ Electroschemes

Removal and installation of the tank from the pump стеклоомывателя


The tank is in an impellent compartment ahead on the right and submits water for washing of wind and back glasses, and also фароомывателя.


1. Turn away bolts of fastening–1 and remove a broad tank of a cooling liquid () (a key of 10 mm) and take out it upward.
2. Turn away 2 screws with crosswise шлицем–2 and remove an adsorber (the petrol engine) () or the fuel filter (the diesel engine) and remove it upward. With – the washer tank.
3. Turn away 2 nuts (arrows on an illustration).
4. Take out the washer tank () upwards from an impellent compartment.
5. Расстыкуйте штекерные connections at the water pump.
6. Merge water from the tank and take out the pump sideways at the tank.


Installation is carried out in sequence, return to removal.

On the main page