Audi A3

Since 1997 of release

Repair and car operation

Removal and installation of switches and lamps

The switch/regulator of range of light

PERFORMANCE ORDER

	1. Press the switch of light–1 and simultaneously turn it on the left–2.
2. Keep the switch in this position and take out the case of the switch of light from the panel of devices–3.
3. Расстыкуйте a socket at the switch.
	4. Raise a flat screw-driver or a plastic wedge lateral stoppers (arrows on an illustration) at a regulator–1 and thus release stoppers.
5. Take out a regulator–1 back from the case of the switch of light.
6. Insert a regulator in directing on the switch of light–2 and press into the case of the switch of light.
7. Join a socket.
	8. For installation press the switch of light–1 and simultaneously turn it to the right–2. Thus both lock hooks are pressed.
9. In this position press light switch into an aperture of the panel of devices–3 and fix.

The switch in the central console

PERFORMANCE ORDER

1. Remove a radio receiver, address to subsection Removal, installation and radio receiver coding.
2. Open an ashtray and take out an insert.
	3. Turn out the screw with crosswise шлицем–1 and remove an ashtray–2.
4. Расстыкуйте a socket of a lamp of illumination of an ashtray and прикуривателя.
	5. Turn out 2 screws with crosswise шлицем (arrows on an illustration).
	6. Turn out 2 screws with crosswise шлицем (arrows on an illustration) in a radio receiver aperture.
7. Cautiously remove upwards facing–1.
	8. Press a hand forward the corresponding switch behind through a radio receiver aperture. Thus simultaneously cautiously small screw-driver press скобы between the switch and the central console.
9. In the conclusion completely take out the switch and расстыкуйте a socket.
10. Installation is carried out in sequence, return to removal.

The switch of a lamp of illumination of a ware box

PERFORMANCE ORDER

1. Cautiously wring out a lateral cover of the panel of devices on the party of the forward passenger.
	2. Расстыкуйте штекерные connections–1 also remove cable tips–2.
3. Put forward the switch–3 of the holder of the panel of devices in an arrow direction.
4. Installation is carried out in sequence, return to removal.

The switch of the steklopodemnika/mechanism of adjustment of a mirror

PERFORMANCE ORDER

1. Remove door facing, address to subsection Removal and installation of facing of a door.
2. Cautiously separate on a facing underside изоляционный a floor-mat.
	3. Расстыкуйте a switch socket window lifterа–3 and-or the mechanism of adjustment of a mirror–1.
4. Take out from facing of a door the switch–1. For this purpose open stoppers–2.
5. Installation is carried out in sequence, return to removal.

The switch сдвижной hatch panels / the internal fixture

The regulator сдвижной panels cannot be replaced separately. In the presence of malfunctions it is necessary to replace knot of management and the internal fixture in the complete set.

PERFORMANCE ORDER

	1. Extend fingers рассеиватель–1 forward and disconnect it behind.
2. Turn away screws of fastening–2 and remove the switch сдвижной panels / the internal fixture–3.
3. Compress a screw-driver hooks () and extend forward the switch сдвижной panels, disconnect it behind ().
4. Расстыкуйте штекерные connections–4 and–5. 6 – a lamp of illumination of reading, 7 – a lamp of the internal fixture.
5. Join штекерные connections at the switch сдвижной panels / the internal fixture.
6. Fix the switch сдвижной panels / the internal fixture in position () and () and fix.
7. Fix the switch / the internal fixture two screws.
8. Fix behind рассеиватель and insert in front into an aperture.

On the main page