Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
- 4. The engine
   + 4.1. Engine OHV (with a camshaft in the block of cylinders)
   + 4.2. Engines OHC
   + 4.3. Engine DOHC with 16 valves
   - 4.4. Diesel engines 16D and 16DА
      4.4.1. A technical characteristics
      4.4.2. A method of removal of the engine
      4.4.3. Engine repair
      4.4.4. Replacement of engine oil and the oil filter
      4.4.5. Check, removal, installation and adjustment of a gear belt
      + 4.4.6. A mechanism drive timing
      4.4.7. Removal and installation of a head of the block of cylinders
      4.4.8. Removal and camshaft installation
      4.4.9. Removal and installation of the oil pallet
      4.4.10. Removal and installation of the oil pump
      4.4.11. Removal and installation перепускного the valve
      4.4.12. Removal and installation of the water pump
      4.4.13. Removal, check and thermostat installation
      4.4.14. Removal and installation of pistons and rods
      4.4.15. Removal and flywheel installation
      - 4.4.16. Replacement of sealing rings
         4.4.16.1. A forward sealing ring of a camshaft
         4.4.16.2. A forward sealing ring of a cranked shaft
         4.4.16.3. A back sealing ring of a cranked shaft
      4.4.17. Replacement of support of the power unit
      + 4.4.18. Removal of the engine from a transmission
      4.4.19. Engine and transmission division
      4.4.20. Engine repair
      4.4.21. Removal, repair and assemblage of the oil pump
      + 4.4.22. A head of the block of cylinders
      4.4.23. Check and restoration of details of the engine
      + 4.4.24. Check of elements of the engine
      4.4.25. Replacement of pushers, persistent linings and hydraulic pushers
      4.4.26. Engine assemblage.
      4.4.27. Connection of the engine with a transmission
      4.4.28. Engine and transmission installation
   + 4.5. Diesel engines of 1,7 l
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





4.4.16. Replacement of sealing rings

4.4.16.1. A forward sealing ring of a camshaft
PERFORMANCE ORDER
1. Remove a gear belt from a camshaft pulley.
2. Remove the air filter. Uncover heads of the block of cylinders.
3. Unscrew a bolt of fastening of a pulley of a camshaft and remove a pulley.
4. Drill in a sealing ring two small apertures located in the opposite ends of a sealing ring. Screw in two self-cutting screws in the drilled apertures of a sealing ring and, using flat-nose pliers, extend for heads of screws a sealing ring.
5. Clear a nest for a sealing ring.
6. Dip a new sealing ring into pure engine oil and, using tubular оправку the corresponding diameter, establish a sealing ring in a nest on demanded depth.

On the main page