Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
- 4. The engine
+ 4.1. Engine OHV (with a camshaft in the block of cylinders)
+ 4.2. Engines OHC
+ 4.3. Engine DOHC with 16 valves
- 4.4. Diesel engines 16D and 16DА
4.4.1. A technical characteristics
4.4.2. A method of removal of the engine
4.4.3. Engine repair
4.4.4. Replacement of engine oil and the oil filter
4.4.5. Check, removal, installation and adjustment of a gear belt
+ 4.4.6. A mechanism drive timing
4.4.7. Removal and installation of a head of the block of cylinders
4.4.8. Removal and camshaft installation
4.4.9. Removal and installation of the oil pallet
4.4.10. Removal and installation of the oil pump
4.4.11. Removal and installation перепускного the valve
4.4.12. Removal and installation of the water pump
4.4.13. Removal, check and thermostat installation
4.4.14. Removal and installation of pistons and rods
4.4.15. Removal and flywheel installation
+ 4.4.16. Replacement of sealing rings
4.4.17. Replacement of support of the power unit
+ 4.4.18. Removal of the engine from a transmission
4.4.19. Engine and transmission division
4.4.20. Engine repair
4.4.21. Removal, repair and assemblage of the oil pump
+ 4.4.22. A head of the block of cylinders
4.4.23. Check and restoration of details of the engine
+ 4.4.24. Check of elements of the engine
4.4.25. Replacement of pushers, persistent linings and hydraulic pushers
4.4.26. Engine assemblage.
4.4.27. Connection of the engine with a transmission
4.4.28. Engine and transmission installation
+ 4.5. Diesel engines of 1,7 l
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes
|
Bottom spherical шарнирное connection
|
|
Bottom spherical шарнирное connection is specified by an arrow. |
Bolts of fastening of a pulley of a cranked shaft
|
|
Bolts of fastening of a pulley of a cranked shaft (are specified by arrows). |
The holder of fuel hoses
Installation is made in sequence, return to removal. |
On the main page
|