Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
- 6. Fuel and exhaust systems
   - 6.1. Models with the carburettor
      6.1.1. A technical characteristics
      6.1.2. Use unleaded gasoline
      6.1.3. Removal and installation of the case of the air filter
      6.1.4. System of adjustment of temperature of air arriving in the engine
      6.1.5. Check, removal and installation of the fuel pump
      6.1.6. Removal and installation of the gauge of level of fuel
      6.1.7. Removal and installation of a fuel tank
      6.1.8. Removal, installation and adjustment of a cable of an accelerator
      6.1.9. Removal and installation of a pedal of an accelerator
      6.1.10. Removal, installation and adjustment of a cable of management air заслонкой
      - 6.1.11. Carburettors
         + 6.1.11.1. Adjustments on the carburettor 32 TL
         + 6.1.11.2. Adjustments on the carburettor 35 PDSI
         + 6.1.11.3. Adjustments on the carburettor 1В1
         - 6.1.11.4. Adjustments on the carburettor 2Е3
            - 6.1.11.4.1. The carburettor is established on the engine
               6.1.11.4.1.1. Turns of idling and quality of a fuel mix
               6.1.11.4.1.2. The accelerated turns of idling
               6.1.11.4.1.3. Vacuum moving заслонки
               6.1.11.4.1.4. Adjustment of the shock-absorber throttle заслонки
            + 6.1.11.4.2. The carburettor is removed from the engine
         + 6.1.11.5. Adjustments on carburettor Varajei II
      6.1.12. Check of the electromagnetic valve of a stopping delivery of fuel
      6.1.13. Removal and carburettor installation
      + 6.1.14. Carburettor repair
      6.1.15. Removal and installation of an inlet collector
      6.1.16. Removal and installation of a final collector
      6.1.17. Removal and installation of a heater of an inlet collector
      6.1.18. Removal and exhaust system installation
   + 6.2. Models with system of injection of fuel
   + 6.3. Models with engines 16D and 16DA
   + 6.4. Models with engines 17D and 17DR
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





6.1.11.4.1.2. The accelerated turns of idling
THE GENERAL DATA

The prevention

For adjustment of the accelerated turns of idling it is necessary to use an exact tachometre and the analyzer of exhaust gases.


PERFORMANCE ORDER
1. Warm up the engine to normal working temperature. Check up turns of idling and the maintenance WITH in exhaust gases. If necessary adjust idling turns. Remove the air filter.
2. Establish the screw of adjustment of the accelerated turns of idling on the second step of a cam of the accelerated idling. Start the engine and, without touching an accelerator pedal, check up turns of the accelerated idling.
3. In need of adjustment switch off the engine and remove заглушку from the screw (it is specified by an arrow) adjustments of the accelerated turns of idling.
4. Check up that the screw of adjustment of the accelerated turns of idling is established on the step of a cam second from above, then start the engine, without touching an accelerator pedal.
5. Rotating the adjusting screw, establish demanded turns of the accelerated idling.
6. If in the course of adjustment of the accelerated turns of idling the radiator fan has joined, stop adjustment and continue it only after deenergizing of the fan of a radiator.
7. After adjustment carrying out switch off the engine and disconnect a tachometre.
8. Establish new заглушку, closing the screw of adjustment of the accelerated turns of idling.

On the main page