1. As a pedal free wheeling is called the size of its moving from the top point to a point in which there is a sensation of resistance to squeezing, i.e. prior to the beginning of activation of a hydraulic drive of corresponding system (coupling or brakes). If the result of measurement falls outside the limits an admissible range, it is necessary to make corresponding updating.
|
2. Press the lever of deenergizing of coupling for утапливания a rod of a pusher of the executive cylinder and check up, whether liquid level increases in the tank of a liquid of coupling. |
3. If level of a working liquid of coupling increases, the free wheeling of a pedal of coupling is adjusted correctly. 4. If level of a working liquid of coupling does not increase, or there is no pusher retraction, it is necessary to make corresponding updating (Coupling see the Head).
5. Check up the bottom part of the main cylinder, демпфер and the executive cylinder of coupling, and also all lines of a hydraulic path and them штуцерные connections on presence of signs of development of leaks. In case of need tighten corresponding fixture / weakened штуцерные sockets. Defective components replace. 6. Check up level of a working liquid of coupling on a scale on an outer side of the tank of the main cylinder. If level is below a mark «MIN», make corresponding updating, having added necessary quantity of a liquid of a demanded grade, - finish level of a liquid to a mark "MOVE", - try not to admit hit in a hydraulic path of a dirt.
|
Avoid mixing of hydraulic liquids of a different grade! |
|