Subaru Legacy/Outback

1999-2003 of release

Repair and car operation



Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
- Routine maintenance
   The schedule of routine maintenance of cars Subaru Legacy and Outback
   Specifications
   The general data on options and adjustments
   Check of levels of liquids (according to the routine maintenance Schedule)
   Replacement of impellent oil and the oil filter
   Check of a condition and replacement of the hoses located in an impellent compartment
   Rotation of wheels
   Greasing of components of the chassis
   Check of a condition of components of system of release of the fulfilled gases
   Check of a condition of seat belts
   Check of a condition of components of a suspension bracket
   Check of a condition of components of a steering drive
   Check and adjustment of structure of a mix of idling, - to a forage of the models equipped catalytic with the converter
   Check of a condition of protective covers of hinges of power shafts
   Condition check, adjustment of effort of a tension of belts of a drive of auxiliary units
   Check and adjustment противооткатного devices
   Check of serviceability of functioning and adjustment of components of coupling
   Checks and adjustments of brake system
   Check of a condition of components of system of cooling
   Check of a condition and replacement of a cooling liquid of the engine
   Replacement of a filtering element of an air cleaner
   Check of a condition of components of the power supply system
   Replacement of a brake liquid/prorolling of a hydraulic path
   Replacement ATF of automatic transmission
   Replacement трансмиссионного oils РКПП
   Replacement of greasings of back and forward differential
   Check of a condition and replacement газораспределительного a belt - models 2.0 and 2.5 l
   Check and replacement of the fuel filter
   Check of a condition and replacement of spark plugs and ВВ electroconductings
   Check of wheel bearings
   Check клапанных backlashes
   Replacement of belts of a drive of auxiliary units and replacement
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Replacement of a filtering element of an air cleaner

 PERFORMANCE ORDER

 Do not try to wash out filtering element of an air cleaner. The paper of which the element is made, is impregnated by the special nonflammable, slowly evaporating viscous liquid doing it cold-resistant and prolonging service life of an element.

The dirt sticks to the viscous liquid filling porous structure of a paper that interferes with its penetration in an inlet path. Element washing involves loss of impregnation and, - as consequence, - appreciable decrease in efficiency of functioning of an air cleaner.
1. Replacement of a filtering element is made regularly according to the schedule of routine maintenance of the car. During operation of the car the filter condition should be checked often enough, in particular in the conditions of strongly dusty district.
2. On models 2.0 and 2.5 l the air cleaner is fixed in a back part of an impellent compartment on the partition centre, on l models 3.0 – in the right back corner.
3. Give bolts of fastening of an air cleaner to basic drains (to model 2.0 and 2.5), release spring clamps of a cover of an air cleaner, disconnect all procedures stirring to performance hoses and uncover, - try not to admit falling in a casing of an air cleaner of extraneous subjects.

4. Take filtering element and wipe internal walls of a casing pure rags.

5. Visually estimate a condition of a filtering element, in case of strong pollution make replacement.

 In order to avoid premature deterioration of internal components of the engine and occurrence of flashes in a final path do not maintain the car with the taken air filter!

6. Establish a replaceable filtering element, track correctness of its landing in a casing.

7. Make assemblage in an order, the return to removal. Fixing bolts tighten with demanded effort.

 On l models 3.0 before installation of a cover of an air cleaner get lock uvulas from the back party of a cover in reception grooves of a casing, then latch clamps.


On the main page