Subaru Legacy/Outback

1999-2003 of release

Repair and car operation


Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
- Routine maintenance
   The schedule of routine maintenance of cars Subaru Legacy and Outback
   Specifications
   The general data on options and adjustments
   Check of levels of liquids (according to the routine maintenance Schedule)
   Replacement of impellent oil and the oil filter
   Check of a condition and replacement of the hoses located in an impellent compartment
   Rotation of wheels
   Greasing of components of the chassis
   Check of a condition of components of system of release of the fulfilled gases
   Check of a condition of seat belts
   Check of a condition of components of a suspension bracket
   Check of a condition of components of a steering drive
   Check and adjustment of structure of a mix of idling, - to a forage of the models equipped catalytic with the converter
   Check of a condition of protective covers of hinges of power shafts
   Condition check, adjustment of effort of a tension of belts of a drive of auxiliary units
   Check and adjustment противооткатного devices
   Check of serviceability of functioning and adjustment of components of coupling
   Checks and adjustments of brake system
   Check of a condition of components of system of cooling
   Check of a condition and replacement of a cooling liquid of the engine
   Replacement of a filtering element of an air cleaner
   Check of a condition of components of the power supply system
   Replacement of a brake liquid/prorolling of a hydraulic path
   Replacement ATF of automatic transmission
   Replacement трансмиссионного oils РКПП
   Replacement of greasings of back and forward differential
   Check of a condition and replacement газораспределительного a belt - models 2.0 and 2.5 l
   Check and replacement of the fuel filter
   Check of a condition and replacement of spark plugs and ВВ electroconductings
   Check of wheel bearings
   Check клапанных backlashes
   Replacement of belts of a drive of auxiliary units and replacement
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Specifications

Recommended greasings and liquids

 Greasings and the liquids recommended to application by the company-manufacturer of cars at the moment of drawing up of the present Management are more low listed. Fresher information can be received on firm car repair shops of company Subaru.


Type and properties of working liquids
Fuel
Type
Models with catalytic the converter Neetilirovannyj gasoline with OCTANESым number not more low 95 (PETROL)
Models without каталитического the converter Gasoline with OCTANESым number not more low 90 (PETROL)
Impellent oil
Type For petrol engines of class SH or SJ on classification API, with marks «ENERGY CONSERVING II» (Power saving up II), - if it is impossible to get universal engine oil SH or SJ, use of oil of class SG, either G4 or G5 on classification CCMC, or A1, A2, A3 on classifications ACEA, and also other oils under condition of presence on packing of new certification mark API - «Starburst» is supposed.
Viscosity 5W/30 for a frigid climate, 10W/40 (10W/30) for the moderate and hot climate.

 At car operation in areas with an arid climate and a heat or in other intense conditions oil for petrol engines of class SH or SJ on API with viscosity number on 30, 40, 10W-50, 20W-40 or 20W-50 on SAE should be used.

Card вязкостей impellent oil

Cooling liquid
Type Firm antifreeze Subaru of demanded concentration
Brake liquid and hydraulic liquid of a drive of coupling
Type FMVSS № 116, fresh brake liquid DOT 3 or DOT 4
Hydraulic liquid ГУР
Type ATF Dexron III, it is desirable manufactures BP, CALTEX, CASTROL, MOBIL, SHELL or TEXACO
Transmissionnaja liquid for АТ
Type ATF DEXRON III
Viscosity  

Card вязкостей трансмиссионного oils for РКПП and forward differential АТ

Greasing for the chassis
Type Litievaja greasing NGLI №2
Coolant of a central air of air
Type HFC-134a (CH2FCF3)
Volumes of working liquids, л*
Fuel tank 64
Impellent oil (including the oil filter) **
Models 2.0 and 2.5 l 		 
Full volume 4.0
Refuelling volume 4.0
L models 3.0
Full volume 6.8
Refuelling volume 5.8
** For a raising of level from the bottom mark in an edge probeа to top it is required about 1 l of oil.
Cooling liquid (to level FULL)
Legacy
L models 2.0
WITH РКПП 7.0
WITH АТ 6.9
L models 2.5
WITH РКПП 6.8
WITH АТ 6.7
Outback
L models 2.5
WITH РКПП 6.8
WITH АТ 6.7
L models 3.0 7.7
Transmissionnoe oil for РКПП
Models with a two-level reducer 4.0
Models without a two-level reducer 3.5
The transmissionnaja liquid for АТ (to merge and fill)
Engines of 2.0 l 8.4 ÷ 8.7
Engines of 2.5 and 3.0 l 9.3 ÷ 9.6
Differentials
Forward differential АТ 1.1 ÷ 1.2
Back differential 0.8
Working liquid ГУР 0.7
* All volumes are resulted only approximately, - at updating be verified with уровневыми labels.
The engine
Specifications to Heads the Engine, the Power supply system and release and an engine Electric equipment see
Ignition system
Specifications to the Head an engine Electric equipment see.
Brake system
Specifications to the Head Brake system see.
Suspension bracket and steering drive
Specifications to the Head the Suspension bracket and a steering see.
Efforts of a tightening of carving connections, Nanometer
Specifications to corresponding Heads of the Management see.

 Efforts of a tightening of carving connections are resulted also in the text of the Head and on сопр. Illustrations.


On the main page