Subaru Legacy/Outback

1999-2003 of release

Repair and car operation



Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
- Routine maintenance
   The schedule of routine maintenance of cars Subaru Legacy and Outback
   Specifications
   The general data on options and adjustments
   Check of levels of liquids (according to the routine maintenance Schedule)
   Replacement of impellent oil and the oil filter
   Check of a condition and replacement of the hoses located in an impellent compartment
   Rotation of wheels
   Greasing of components of the chassis
   Check of a condition of components of system of release of the fulfilled gases
   Check of a condition of seat belts
   Check of a condition of components of a suspension bracket
   Check of a condition of components of a steering drive
   Check and adjustment of structure of a mix of idling, - to a forage of the models equipped catalytic with the converter
   Check of a condition of protective covers of hinges of power shafts
   Condition check, adjustment of effort of a tension of belts of a drive of auxiliary units
   Check and adjustment противооткатного devices
   Check of serviceability of functioning and adjustment of components of coupling
   Checks and adjustments of brake system
   Check of a condition of components of system of cooling
   Check of a condition and replacement of a cooling liquid of the engine
   Replacement of a filtering element of an air cleaner
   Check of a condition of components of the power supply system
   Replacement of a brake liquid/prorolling of a hydraulic path
   Replacement ATF of automatic transmission
   Replacement трансмиссионного oils РКПП
   Replacement of greasings of back and forward differential
   Check of a condition and replacement газораспределительного a belt - models 2.0 and 2.5 l
   Check and replacement of the fuel filter
   Check of a condition and replacement of spark plugs and ВВ electroconductings
   Check of wheel bearings
   Check клапанных backlashes
   Replacement of belts of a drive of auxiliary units and replacement
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Check of wheel bearings

Design ступичной assemblages of a forward wheel

1 — the Internal epiploon
2 — the Lock ring
3 — the Bearing
4 — the Rotary fist

5 — the External epiploon
6 — gauge ABS Rotor
7 — Stupichnyj a bolt
8 — the Nave


The forward wheel bearing

 PERFORMANCE ORDER

 First of all it is necessary to check up a condition of greasing of the wheel bearing.

1. Поддомкратьте redock of the car also establish it on props.
2. For a size estimation люфта the wheel bearing undertake a hand a forward wheel and shake it outside and inside.
3. Give wheel nuts and remove a forward wheel.
4. At revealing люфта, fix on ступичной to assemblage циферблатный a measuring instrument плунжерного type and make gauging of size of axial displacement. Compare result of measurement to requirements of Specifications.
5. Give самоконтрящиеся nuts, remove bolts and disconnect the cross-section lever of a suspension bracket from a cross-section beam.
6. Lungs постукиванием take a spring pin of fastening on a transmission spindle вибропоголощающего триподного the hinge of free rotation (SFJ). Remove the hinge from a spindle.
7. One hand keeping a power shaft in horizontal position, and rotating another a wheel nave, check up assemblage on presence of extraneous noise, jerks and other signs of infringement of smoothness of a course. In case of need remove a power shaft and check up a condition of components ступичной assemblages (the bearing, epiploons and so forth).


The back wheel bearing

 PERFORMANCE ORDER

1. Поддомкратьте a back of the car also establish it on props.
2. For a size estimation люфта the wheel bearing undertake a hand a back wheel and shake it outside and inside.
3. Give wheel nuts and remove a back wheel.
4. At revealing люфта, fix on ступичной to assemblage циферблатный a measuring instrument плунжерного type and make gauging of size of axial displacement. Compare result of measurement to requirements of Specifications.
5. Disconnect from back differential the hinge of double indemnification (DOJ) a back power shaft.

6. One hand keeping a power shaft in horizontal position, and rotating another a wheel nave, check up assemblage on presence of extraneous noise, jerks and other signs of infringement of smoothness of a course. In case of need remove a power shaft and check up a condition of components ступичной assemblages (the bearing, epiploons and so forth).

7. Keeping one hand a forward leading shaft in horizontal position, other hand rotate nave assemblage to establish presence or absence of noise or a friction. If assemblage of a nave of a back wheel rotates with noise or a friction, disassemble a back axis and check up a condition of epiploons, bearings etc.


On the main page