Subaru Legacy/Outback

1999-2003 of release

Repair and car operation

Subaru Legasi, Autbek
+ Cars Subaru Legacy, Outback
+ The operation manual
- Routine maintenance
   The schedule of routine maintenance of cars Subaru Legacy and Outback
   The general data on options and adjustments
   Check of levels of liquids (according to the routine maintenance Schedule)
   Replacement of impellent oil and the oil filter
   Check of a condition and replacement of the hoses located in an impellent compartment
   Rotation of wheels
   Greasing of components of the chassis
   Check of a condition of components of system of release of the fulfilled gases
   Check of a condition of seat belts
   Check of a condition of components of a suspension bracket
   Check of a condition of components of a steering drive
   Check and adjustment of structure of a mix of idling, - to a forage of the models equipped catalytic with the converter
   Check of a condition of protective covers of hinges of power shafts
   Condition check, adjustment of effort of a tension of belts of a drive of auxiliary units
   Check and adjustment противооткатного devices
   Check of serviceability of functioning and adjustment of components of coupling
   Checks and adjustments of brake system
   Check of a condition of components of system of cooling
   Check of a condition and replacement of a cooling liquid of the engine
   Replacement of a filtering element of an air cleaner
   Check of a condition of components of the power supply system
   Replacement of a brake liquid/prorolling of a hydraulic path
   Replacement ATF of automatic transmission
   Replacement трансмиссионного oils РКПП
   Replacement of greasings of back and forward differential
   Check of a condition and replacement газораспределительного a belt - models 2.0 and 2.5 l
   Check and replacement of the fuel filter
   Check of a condition and replacement of spark plugs and ВВ electroconductings
   Check of wheel bearings
   Check клапанных backlashes
   Replacement of belts of a drive of auxiliary units and replacement
+ The engine
+ Systems of cooling, heating
+ The power supply system and release
+ Engine electric equipment
+ Manual box and differential
+ Automatic transmission
+ Coupling
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Replacement ATF of automatic transmission


1. Replacement ATF should be made on a regular basis, according to the Schedule of routine maintenance of the car (see Has undressed the Schedule of routine maintenance of cars Subaru Legacy and Outback). As трансмиссионная the liquid remains hot still long time after trip end before to start procedure performance, wait full cooling of the engine (3-4 hours).
2. Prepare fresh трансмиссионную a liquid of a corresponding grade (Specifications in the beginning of the Head see).
3. Number other necessary for performance of forthcoming procedure of tools and materials concern: подкатной (тележечный) a jack, props for car fixing in the lifted position, drain capacity in volume not less than 10 l and a stock of rags and old newspapers.
4. Park the car on an equal horizontal platform with a firm covering, поддомкратьте it and establish on props, having provided an easy approach to a drain stopper of the pallet картера transmissions.
5. At a corresponding complete set of the car remove protection картера transmissions.

6. Get under the pallet drain capacity and all necessary stock. Try not to touch to located under with the car bottom разогретым to components of the power unit and system of release of the fulfilled gases. Having placed properly reception container, turn out a drain stopper. When вытекание liquids completely will stop, wipe a stopper, screw it on the regular place and tighten with demanded effort (24.5 Nanometers), - do not forget to replace a sealing washer.

7. Refuelling fresh ATF is made through a control/jellied aperture in which stopper it is built in measuring probe. Fill in ATF to the middle of a working range of the "cold" party of an edge measuring probeа.

8. Translate transmission in position Р, cock a lay brake and start the engine.
9. Serially having spent selector AT lever through all positions, return it in position Р. Wait, while ATF will not get warm to temperature of an order 60 80 C, then check up liquid level on "the hot" party probeа. In case of need make corresponding updating.
10. Within first several days of operation of the car try to look regularly under the car, checking transmission on presence of signs of development of leaks. Once again check up level ATF, in case of need make updating.

On the main page