Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
- 11. Brake system
   11.1. A technical characteristics
   - 11.2. Prorolling of hydraulic brake system
      11.2.1. Prorolling – the basic method (two persons)
      11.2.2. Prorolling – use of the complete set with the unidirectional valve
      11.2.3. Prorolling – use of the complete set of prorolling under pressure
      11.2.4. All methods
   11.3. Brake pipelines and hoses
   + 11.4. Lobbies brake Pads
   11.5. Replacement back brake колодок on disk brakes
   11.6. Replacement back brake колодок on drum-type brakes
   11.7. Check, removal and installation of a forward brake disk
   11.8. Check, removal and installation of a back brake disk
   11.9. Removal, check and installation of a brake drum
   + 11.10. A support of a forward brake
   + 11.11. A support of a back disk brake
   + 11.12. The back working brake cylinder
   + 11.13. The main brake cylinder
   + 11.14. Valves of adjustment of pressure
   11.15. Replacement of the unidirectional valve of the vacuum amplifier of brakes
   11.16. Check, removal and installation of the vacuum amplifier of brakes
   11.17. Removal and installation of a pedal of a brake
   11.18. Removal and installation of a cable of a manual brake
   11.19. Removal and installation of the lever of a manual brake
   11.20. Replacement brake колодок a manual brake on back disk brakes
   + 11.21. Antiblocking system of brakes (ABS)
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





11.2.4. All methods
PERFORMANCE ORDER
1. After end of process of prorolling strongly press a brake pedal, thus it should pass about half of course.
2. Смойте all traces of the spilt brake liquid also tighten unions of prorolling by the demanded moment, then establish on them dustproof caps.
3. Check up level of a brake liquid in пополнительном a tank of brake system and, if necessary, add a brake liquid.

The prevention

The remote brake liquid should not be used more. The pure brake liquid should be stored in a tight vessel as it very much гигроскопична that lowers temperature of boiling and worsens technical characteristics of a brake liquid.


On the main page