Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
- 4. The engine
   + 4.1. Engine OHV (with a camshaft in the block of cylinders)
   + 4.2. Engines OHC
   + 4.3. Engine DOHC with 16 valves
   - 4.4. Diesel engines 16D and 16DА
      4.4.1. A technical characteristics
      4.4.2. A method of removal of the engine
      4.4.3. Engine repair
      4.4.4. Replacement of engine oil and the oil filter
      4.4.5. Check, removal, installation and adjustment of a gear belt
      + 4.4.6. A mechanism drive timing
      4.4.7. Removal and installation of a head of the block of cylinders
      4.4.8. Removal and camshaft installation
      4.4.9. Removal and installation of the oil pallet
      4.4.10. Removal and installation of the oil pump
      4.4.11. Removal and installation перепускного the valve
      4.4.12. Removal and installation of the water pump
      4.4.13. Removal, check and thermostat installation
      4.4.14. Removal and installation of pistons and rods
      4.4.15. Removal and flywheel installation
      + 4.4.16. Replacement of sealing rings
      4.4.17. Replacement of support of the power unit
      + 4.4.18. Removal of the engine from a transmission
      4.4.19. Engine and transmission division
      4.4.20. Engine repair
      4.4.21. Removal, repair and assemblage of the oil pump
      + 4.4.22. A head of the block of cylinders
      4.4.23. Check and restoration of details of the engine
      - 4.4.24. Check of elements of the engine
         4.4.24.1. Check of a cranked shaft
         4.4.24.2. Check of loose leaves radical and шатунных bearings
         4.4.24.3. Check of cylinders
         4.4.24.4. Check of rods
         4.4.24.5. Check of pistons and piston rings
         4.4.24.6. Flywheel check
         4.4.24.7. Check of a camshaft and the camshaft case
      4.4.25. Replacement of pushers, persistent linings and hydraulic pushers
      4.4.26. Engine assemblage.
      4.4.27. Connection of the engine with a transmission
      4.4.28. Engine and transmission installation
   + 4.5. Diesel engines of 1,7 l
+ 5. System of cooling, heating and ventilation
+ 6. Fuel and exhaust systems
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes

4.4.24.3. Check of cylinders
PERFORMANCE ORDER
1. Measure ovality and конусность cylinders.
2. Measure diameter of each cylinder in the top, average and bottom its parts in parallel an axis of a cranked shaft. Measure diameter of each cylinder in the top, average and bottom its parts of perpendicularly axis of a cranked shaft. Конусность the cylinder it is calculated as a difference between top and bottom in diameters. Ovality – as a difference between parallel and perpendicular gaugings.
3. If the received results do not coincide with technical requirements, cylinders are necessary for processing in a specialised workshop.


On the main page