Opel Kadett E

1984-1991 of release

Repair and car operation



Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
- 6. Fuel and exhaust systems
   - 6.1. Models with the carburettor
      6.1.1. A technical characteristics
      6.1.2. Use unleaded gasoline
      6.1.3. Removal and installation of the case of the air filter
      6.1.4. System of adjustment of temperature of air arriving in the engine
      6.1.5. Check, removal and installation of the fuel pump
      6.1.6. Removal and installation of the gauge of level of fuel
      6.1.7. Removal and installation of a fuel tank
      6.1.8. Removal, installation and adjustment of a cable of an accelerator
      6.1.9. Removal and installation of a pedal of an accelerator
      6.1.10. Removal, installation and adjustment of a cable of management air заслонкой
      - 6.1.11. Carburettors
         + 6.1.11.1. Adjustments on the carburettor 32 TL
         + 6.1.11.2. Adjustments on the carburettor 35 PDSI
         + 6.1.11.3. Adjustments on the carburettor 1В1
         + 6.1.11.4. Adjustments on the carburettor 2Е3
         - 6.1.11.5. Adjustments on carburettor Varajei II
            - 6.1.11.5.1. The carburettor with automatic air заслонкой
               6.1.11.5.1.1. Turns of idling and quality of a fuel mix
               6.1.11.5.1.2. The accelerated turns of idling
               6.1.11.5.1.3. Заслонка movings (backlash)
               6.1.11.5.1.4. The accelerated idling (backlash)
               6.1.11.5.1.5. Position completely open throttle заслонки
               6.1.11.5.1.6. A cover automatic air заслонки
               6.1.11.5.1.7. The accelerating pump
               6.1.11.5.1.8. The shock-absorber throttle заслонки
               6.1.11.5.1.9. Partial loading
            + 6.1.11.5.2. The hand-operated carburettor air заслонкой
      6.1.12. Check of the electromagnetic valve of a stopping delivery of fuel
      6.1.13. Removal and carburettor installation
      + 6.1.14. Carburettor repair
      6.1.15. Removal and installation of an inlet collector
      6.1.16. Removal and installation of a final collector
      6.1.17. Removal and installation of a heater of an inlet collector
      6.1.18. Removal and exhaust system installation
   + 6.2. Models with system of injection of fuel
   + 6.3. Models with engines 16D and 16DA
   + 6.4. Models with engines 17D and 17DR
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes





6.1.11.5.1.7. The accelerating pump
THE GENERAL DATA

On the engine, heated-up to normal working temperature, at the pedal of an accelerator established in a starting position, there should not be a backlash between a control lever of the accelerating pump and плунжером the pump.

PERFORMANCE ORDER
1. Ask the assistant to press an accelerator pedal against the stop and to keep it in this position. A screw-driver press on плунжер the pump and check up that it can move further down to occurrence of notable resistance.
2. If necessary turn in a control lever of the accelerating pump.
3. Check up that by pressing плунжера the pump in the carburettor the fuel stream moves. Otherwise remove and clear the carburettor and, if necessary, replace details of the accelerating pump.

On the main page