Opel Kadett E

1984-1991 of release

Repair and car operation

Opel Kadett E
+ 1. The maintenance instruction
+ 2. Weekly checks and service in a way
+ 3. Maintenance service
+ 4. The engine
+ 5. System of cooling, heating and ventilation
- 6. Fuel and exhaust systems
   - 6.1. Models with the carburettor
      6.1.1. A technical characteristics
      6.1.2. Use unleaded gasoline
      6.1.3. Removal and installation of the case of the air filter
      6.1.4. System of adjustment of temperature of air arriving in the engine
      6.1.5. Check, removal and installation of the fuel pump
      6.1.6. Removal and installation of the gauge of level of fuel
      6.1.7. Removal and installation of a fuel tank
      6.1.8. Removal, installation and adjustment of a cable of an accelerator
      6.1.9. Removal and installation of a pedal of an accelerator
      6.1.10. Removal, installation and adjustment of a cable of management air заслонкой
      - 6.1.11. Carburettors
         + Adjustments on the carburettor 32 TL
         + Adjustments on the carburettor 35 PDSI
         + Adjustments on the carburettor 1В1
         + Adjustments on the carburettor 2Е3
         - Adjustments on carburettor Varajei II
            - The carburettor with automatic air заслонкой
      Turns of idling and quality of a fuel mix
      The accelerated turns of idling
      Заслонка movings (backlash)
      The accelerated idling (backlash)
      Position completely open throttle заслонки
      A cover automatic air заслонки
      The accelerating pump
      The shock-absorber throttle заслонки
      Partial loading
            + The hand-operated carburettor air заслонкой
      6.1.12. Check of the electromagnetic valve of a stopping delivery of fuel
      6.1.13. Removal and carburettor installation
      + 6.1.14. Carburettor repair
      6.1.15. Removal and installation of an inlet collector
      6.1.16. Removal and installation of a final collector
      6.1.17. Removal and installation of a heater of an inlet collector
      6.1.18. Removal and exhaust system installation
   + 6.2. Models with system of injection of fuel
   + 6.3. Models with engines 16D and 16DA
   + 6.4. Models with engines 17D and 17DR
+ 7. Start and gymnastics system
+ 8. Ignition system
+ 9. Coupling
+ 10. Transmissions and power shafts
+ 11. Brake system
+ 12. A suspension bracket and a steering
+ 13. A body
+ 14. Electric schemes Partial loading

Unstable work of the engine or fluctuation at insignificant opening throttle заслонки or fuel overconsumption at normal operational modes are caused by wrong adjustment of the screw of partial loading.

This adjustment should not be made before elimination of all available malfunctions.

1. Remove the carburettor from the engine.
2. Using the lever, remove the metal stopper closing the screw of adjustment of partial loading which is located adjacently with submitting fuel hose.
3. If the adjustment reason is the stop or engine fluctuations a mix too poor and it is necessary to turn the screw on a turn quarter counter-clockwise.
4. If the adjustment reason – fuel overconsumption a mix too rich also it is necessary to turn the screw on a turn quarter clockwise.
5. Establish the carburettor and check up, whether engine work has improved.
6. If the further adjustment is necessary, execute it, but do not turn the screw more than on half of turn from a starting position.
7. Establish on the screw a new metal stopper.

On the main page